Description

DESCRIPTION
When wet steam is used in sterilization, moisture in
suspension reduces the heat transfer efficiency and the validity of the sterilization process can be compromised.
S-11 series centrifugal separators remove moisture from steam pipelines. Steam passing through the separator and as a result of centrifugal forces, impact and swirling effects, separate the particles with a heavier specific gravity, such as water droplets and moisture in suspension.
The condensate collected at the bottom of the separator, must be automatically drained by a suitable steam trap.

MAIN FEATURES
316L stainless steel construction.
No moving parts.
Self draining design.

STANDARD SURFACE FINISH
Internal parts: ≤ 0,5 microns Ra
External : Satin bead blast finish – 1,6 microns Ra
Mechanical polished as option

OPTIONS: Vent connection

USE: Different kind of connections and dimensions
Steam, compressed air and other
gases (Group 2).

AVAILABLE MODELS:
S11
S11A – with air vent connection

SIZES: DN1/2”, 3/4”,1”, 11/2” and 2”

PIPE CONNECTIONS:
Clamped ends ASME BPE
Other sanitary clamp or tube weld connections availableon request.

PACKAGING:
Assembling and packaging in a clean room certifiedaccording to ISO 14644-1.
The product is end capped and vacuum sealed withrecyclable plastic film to avoid contamination.

INSTALLATION:
Always with the condensate discharge pointingdownwards. See IMI, installation and maintenance instructions.

HOW TO SELECT:
Generally, in an existing plant it is advisable to fit aseparator with the same size of the pipe line. Pressuredrop is normally negligible. For approximate pressuredrop calculation please consult.